Thames Water Build Over Agreement Cost
If pipes are located near the building you want to build in, this could have an impact on the design of the building. In addition to reviewing the municipality`s building rules, it is important that you work with us to ensure that the pipes are protected and that our access to the municipality is not restricted. Once you are ready to submit, there are two types of applications. The first is a request for a self-certified build over agreement, but Thames Water will only grant you this which will allow you to confirm that your plans are low risk for pipes. It`s worth a try as it`s free. If you do not comply with the terms of the self-certified agreement, you must apply for an approved construction agreement that includes a tax at Thames Water. For this application, you need to know the diameter of your outputs. The real estate search you did (mentioned above) will tell you, or your owner can tell you at any time if you started on the spot and discovered the exits. They also need a implementation plan, a section plan, and existing and proposed plans. You submit this application online for about 299 euros or you can do it by mail for 343 euros. For all excavation work within 3 metres of a public sewer or sewer, a Thames Water Build over Agreement is required. Given the density of construction in London and other cities, this probably means that all the work you intend to do for your domain, including excavations, will likely require the verification and approval of Thames Water. First, try to search your property in www.thameswater-propertysearches.co.uk/.
Yes… Take an excursion to your local authorities and take a look at their channel maps. These cards can`t tell you exactly where and what the pipes are. then……. We propose to catch up with the professionals and pay for a CCTV drainage survey. Expect to pay only 200 euros for this service. TIP: This is also a great opportunity to check the condition of your sewer lines and it could save you money in the event of a project delay. If the sewers are not inside and/or more than 160 mm in diameter, we will not grant approval until we have completed a CCTV review prior to construction. You can then do the approved work.
This provides the location of known water and/or sewer lines, including pipe dimensions and flow direction. Pipe depths and recovery levels are provided when data is available. You do not need our consent if you build outside these distances. We will be happy to check your plans and give you written confirmation if you are not sure. Read more details. Damage to a public discharge or sewer can not only result in the homeowner being legally responsible for the cost of repairing the public discharge or sewerage, but also the cost of the surrounding land or houses.